manualshive.com logo in svg

IEI Technology IQ7-US15W, User Manual, Page: 107 / 139

Share
Download
IEI Technology IQ7-US15W User Manual Download Page 107

 

 

IQ7 Design Guide 

Page 95 

ƒ

 

End of Post S5 HECI Message [Enabled] 

Use the 

End of Post S5 HECI Message

 option to enable or disable the Intel® AMT the 

HECI message to wake the system in an S5 sleep state. 

Î

 

Disabled D

EFAULT

 

HECI bus cannot rouse system from an S5 state 

Î

 

Enabled  

HECI bus can rouse system from an S5 state 

ƒ

 

ME-HECI [Enabled] 

This option is not user configurable. 

ƒ

 

ME-IDER [Enabled] 

Use the 

ME-IDER

 option to enable or disable the IDE-Redirection (IDER) protocol to 

enable the Intel® AMT enabled product to boot from an OS image, floppy, CD or a DVD 

device. 

Î

 

Disabled D

EFAULT

 

The IDER protocol is disabled 

Î

 

Enabled  

The IDER protocol is enabled 

ƒ

 

ME-KT [Enabled] 

Use the 

ME-KT

 option to enable or disable the Serial Over LAN (SOL) protocol to enable 

the Intel® AMT enabled product to redirect the keyboard/text from a local host to a remote 

workstation. 

Î

 

Disabled D

EFAULT

 

The SOL protocol is disabled 

Î

 

Enabled  

The SOL protocol is enabled 

Summary of Contents for IQ7-US15W












































































































































Reviews:

No comments