IEI Technology IQ7-DB-MITX, User Manual

Page: 77 / 139

IQ7 Design Guide
Page 65
4.4.3 CompactFlash® Master/Slave Selection
Jumper Label: JP4
Jumper Type: 3-pin header
Jumper Settings:
See Table 4-32
Jumper Location:
See Figure 4–29
Sets the CompactFlash® slot as the IDE primary master or primary slave.
Pin Description
1-2 Slave
2-3 Master
Table 4-32: CompactFlash® Master/Slave Selection
4.4.4 CompactFlash® Voltage Selection
Jumper Label: JP3
Jumper Type: 3-pin header
Jumper Settings: See Table 4-33
Jumper Location: See Figure 4–29
Sets the voltage of the power supplied to the CompactFlash® card.
Pin Description
1-2 5.0 V
2-3 3.3 V
Table 4-33: CompactFlash® Voltage Selection
4.4.5 LAN & PCIe Enable/Disable
Jumper Label: SW3
Jumper Type: 4 switches
Jumper Settings: See Table 4-34
Jumper Location: See Figure 4–29