IEI Technology IOWA-8522 User Manual Download

Page: 180 / 244

IOWA-8522 Motherboard

Page 160

7.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the

product and is subject to change without prior notice. You may visit

the IEI website or contact technical support for the latest updates.

The following drivers can be installed on the system.

Chipset driver - \1-INF\6.3.0.1007

VGA driver - \2-VGA\WIN2K_XP\14.19.50.4497

LAN driver - \3-LAN\Intel\Intel 82562ET\WIN_2KXP

USB driver - \4-USB2.0\Intel\WinXP

Audio driver - \5-Audio\ALC655\Windows\Windows 98Gold, 98se, Me, 2000,

XP, 2003(32,64 bits)

SATA driver - \6-SATA RAID\VT 6421\VIA-Windows_Falcon_IDE-

V220A\SATAIDE\WXP

Installation instructions are given below.

7.2 Driver CD Auto-run

NOTE:

All the instructions that follow are for a Windows operating system.

All the drivers for the IOWA-8522 are on the CD that came with the system. To install the

drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

Step 2:

The CD starts up automatically

Summary of Contents for IOWA-8522





















































































































































































































































Search results

Summary of Contents for IOWA-8522

Reviews:

Related manuals for IOWA-8522

Brands by name

Popular brands

IEI Technology IOWA-8522, User Manual

Search results

Summary of Contents for IOWA-8522

Reviews:

Related manuals for IOWA-8522

Brands by name

Popular brands