IEI Technology IOVU-570M, User Manual

Page: 24 / 49

IOVU-570M Panel PC
Page 16
4.1 Installation Precautions
During installation, be aware of the precautions below:
ƒ
Read the user manual
: The user manual provides a complete description of
the IOVU-570M, installation instructions and configuration options.
ƒ
DANGER! Disconnect Power
: Power to the IOVU-570M must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the IOVU-570M is opened while the power cord is still
connected to an electrical outlet.
ƒ
Qualified Personnel
: The IOVU-570M must be installed and operated only
by trained and qualified personnel. Maintenance, upgrades, or repairs may
only be carried out by qualified personnel who are familiar with the associated
dangers.
ƒ
Air Circulation
: Make sure there is sufficient air circulation when installing the
IOVU-570M. The IOVU-570M’s cooling vents must not be obstructed by any
objects. Blocking the vents can cause overheating of the IOVU-570M. Leave
at least 5 cm of clearance around the IOVU-570M to prevent overheating.
ƒ
Grounding
: The IOVU-570M should be properly grounded. The voltage feeds
must not be overloaded. Adjust the cabling and provide external overcharge
protection per the electrical values indicated on the label attached to the back
of the IOVU-570M.
4.2 SD Card Installation
The IOVU-570M supports a single SD card. To install the SD card, follow the steps below.
Step 1:
Undo the SD card cover screw.
Step 2:
Slide open the SD card cover.
Step 3:
Slide the SD card into the slot. Replace the SD card slot cover and screw.
Step 0: