IEI Technology IMBA-X9654 User Manual Download Page 94

Page: 94 / 266

IMBA-X9654 ATX Motherboard

Page 76

CN Location:

See Figure 4-23

CN Pinouts:

See Figure

4-26

Line In port (Light Blue):

Connects a CD-ROM, DVD player, or other audio

devices.

Speaker Out port (Lime):

Connects to a headphone or a speaker. With

multi-channel configurations, this port can also connect to front speakers.

Microphone (Pink):

Connects a microphone.

Figure 4-26: Audio Connector

4.3.4 LAN Connectors

CN Label:

J20 and J21

CN Type:

RJ-45

CN Location:

Figure 4-23

CN Pinouts:

Table 4-27

The IMBA-X9654 is equipped with two built-in RJ-45 Ethernet controllers. The controllers

can connect to the LAN through two RJ-45 LAN connectors. There are two LEDs on the

connector indicating the status of LAN. The pin assignments are listed in the following

table:

Summary of Contents for IMBA-X9654











































































































































































































































































Search results

Summary of Contents for IMBA-X9654

Reviews:

IEI Technology IMBA-X9654, User Manual, Page: 94 / 266

Search results

Summary of Contents for IMBA-X9654

Reviews: