IEI Technology IMBA-X9654 User Manual Download Page 129

Page: 129 / 266

IMBA-X9654 ATX Motherboard

Page 111

Chapter 3

Step 2:

Insert the DB-25 connector

Insert the DB-25 connector of a parallel device

into the DB-25 connector on the external peripheral interface. See Figure 5-23.

Figure 5-23: Parallel Device Connector

Step 3:

Secure the connector

. Secure the DB-25 connector to the external interface by

tightening the two retention screws on either side of the connector.

Step 0:

5.8.4 PS/2 Keyboard and Mouse Connection

The IMBA-X9654 has a dual PS/2 connector on the external peripheral interface panel.

The dual PS/2 connector is used to connect to a keyboard and mouse to the system.

Follow the steps below to connect a keyboard and mouse to the IMBA-X9654.

Step 1:

Locate the dual PS/2 connector

. The location of the dual PS/2 connector is

shown in

Chapter 3

Step 2:

Insert the keyboard/mouse connector

Insert a PS/2 keyboard or mouse

connector into the appropriate PS/2 connector on the external peripheral

Summary of Contents for IMBA-X9654











































































































































































































































































Search results

Summary of Contents for IMBA-X9654

Reviews:

IEI Technology IMBA-X9654, User Manual, Page: 129 / 266

Search results

Summary of Contents for IMBA-X9654

Reviews: