IEI Technology IMBA-Q454-R10 User Manual Download Page 98

Page: 98 / 213

IMBA-Q454-R10 User Manual

Page 98

AHCI

The SATA drive connected to the nth SATA drive port is

specified as a normal SATA drive.

IDE Master and IDE Slave

When entering setup, BIOS automatically detects the presence of IDE devices. BIOS

displays the status of the auto detected IDE devices. The following IDE devices are

detected and are shown in the

IDE Configuration

menu:

Primary

IDE

Master

Primary

IDE

Slave

Secondary IDE Master

Secondary IDE Slave

Third IDE Master

Fourth IDE Master

The

IDE Configuration

menu (Error! Reference source not found.) allows changes to the

configurations for the IDE devices installed in the system. If an IDE device is detected and

one of the above listed four BIOS configuration options are selected, the IDE configuration

options shown in

Section 5.3.2.1

appear.

5.3.2.1 IDE Master, IDE Slave

Use the

IDE Master

and

IDE Slave

configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

Summary of Contents for IMBA-Q454-R10






















































































































































































































Search results

Summary of Contents for IMBA-Q454-R10

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-Q454-R10, User Manual

Search results

Summary of Contents for IMBA-Q454-R10

Reviews:

Brands by name

Popular brands