IEI Technology IMBA-Q370-R20, User Manual, Page: 114 / 163

IMBA-Q370 ATX Motherboard
Page 98
5.3.6.8 Parallel Port Configuration
Use the Parallel Port Configuration menu ( BIOS Menu 11 ) to configure the parallel port.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Advanced
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=5
Device Mode [STD Printer Mode]
Set Parameters of
Parallel Port (LPT/LPTE)
---------------------

: Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 11: Parallel Port Configuration Menu

Parallel Port [Enabled]
Use the Parallel Port option to enable or disable the parallel port.

Disabled Disable the parallel port

Enabled D
EFAULT
Enable the parallel port

Device Mode [STD Printer Mode]
Use the Device Mode option to select the mode the parallel port operates in.
Configuration options are listed below.

STD Printer Mode Default

SPP Mode

EPP-1.9 and SPP Mode

EPP-1.7 and SPP Mode

ECP Mode

ECP and EPP 1.9 Mode

ECP and EPP 1.7 Mode