IEI Technology IMBA-Q370-R20, User Manual, Page: 105 / 163

IMBA-Q370 ATX Motherboard
Page 89

Auto mode fan start/off temperature
Use the + or – key to change the Auto mode fan start/off temperature value. Enter a
decimal number between 1 and 100.

Auto mode fan start PWM
Use the + or – key to change the Auto mode fan start PWM value. Enter a decimal
number between 1 and 100.

Auto mode fan slope PWM
Use the + or – key to change the
Auto mode fan slope PWM
value. Enter a decimal
number between 1 and 8.
5.3.6 F81866 Super IO Configuration
Use the
F81866 Super IO Configuration
menu (
BIOS Menu 9
) to set or change the
configurations for the parallel ports and serial ports.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Advanced
Super IO Configuration
Super IO Chip F81866
> Serial Port 1 Configuration
> Serial Port 2 Configuration
> Serial Port 3 Configuration
> Serial Port 4 Configuration
> Serial Port 5 Configuration
> Serial Port 6 Configuration
> Parallel Port Configuration
Case Open Detection [Disabled]
Set Parameters of Serial
Port 1 (COMA)
---------------------

: Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 9: F81866 Super IO Configuration

Case Open Beep [Disabled]
Use the Case Open Beep option to enable or disable the case open beep function.

Disabled D
EFAULT
Disable the case open beep function