manualshive.com logo in svg

IEI Technology IMBA-Q170-i2, User Manual

Share
Download
IEI Technology IMBA-Q170-i2 User Manual Download Page 159

 

 

IMBA-Q170-i2 ATX Motherboard 

Page 143

   

DECLARATION OF CONFORMITY 

 

This equipment

 

has been tested and found to comply with specifications for CE marking. 

If the user modifies and/or installs other devices in the equipment, the CE conformity 

declaration may no longer apply. 

 

 

 

FCC WARNING 

 

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

„

 

This device may not cause harmful interference, and 

„

 

This device must accept any interference received, including interference 

that may cause undesired operation. 

 

This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated in a 

commercial environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the instruction 

manual, may cause harmful interference to radio communications. Operation of this 

equipment in a residential area is likely to cause harmful interference in which case the 

user will be required to correct the interference at his own expense. 

 

 

 

Summary of Contents for IMBA-Q170-i2























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands