IEI Technology IMBA-H610 User Manual Download

Page: 64 / 193

IMBA-H610 ATX Motherboard

Page 49

4.2.2 Socket LGA1155 Cooling Kit Installation

WARNING:

DO NOT attempt to install a push-pin cooling fan.

The pre-installed support bracket prevents the board from bending and

is ONLY compatible with captive screw type cooling fans.

The cooling kit can be bought from IEI. The cooling kit has a heatsink and fan.

WARNING:

Do not wipe off (accidentally or otherwise) the pre-sprayed layer of

thermal paste on the bottom of the heat sink. The thermal paste

between the CPU and the heat sink is important for optimum heat

dissipation.

To install the cooling kit, follow the instructions below.

Step 1:

A cooling kit bracket is pre-installed on the rear of the motherboard. See

Figure

4-5.

Summary of Contents for IMBA-H610


































































































































































































Search results

Summary of Contents for IMBA-H610

Reviews:

Related manuals for IMBA-H610

Brands by name

Popular brands

IEI Technology IMBA-H610, User Manual

Search results

Summary of Contents for IMBA-H610

Reviews:

Related manuals for IMBA-H610

Brands by name

Popular brands