IEI Technology IMBA-G412ISA, User Manual

Page: 63 / 164

2012/1/202012/1/20
IMBA-G412IS A ATX Mo th e rb o a rd
P a g e 49
4.3.3 DIMM In s ta lla tio n
To install a DIMM, please follow the steps below and refer to Figure 4-7 .
Figure 4-7: DIMM Installation
S te p 1: Open the DIMM socket handles . Open the two handles outwards as far as
they can. See Figure 4-7 .
S te p 2:
Align the DIMM with the socket . Align the DIMM so the notch on the memory
lines up with the notch on the memory socket. See Figure 4-7 .
S te p 3:
Insert the DIMM . Once aligned, press down until the DIMM is properly seated.
Clip the two handles into place. See Figure 4-7 .
S te p 4: Removing a DIMM . To remove a DIMM, push both handles outward. The
memory module is ejected by a mechanism in the socket.
S te p 0:
4.3.4 Mo th e rb o a rd In s ta lla tio n
To install the IMBA-G412ISA motherboard into the chassis please refer to the reference
material that came with the chassis.