IEI Technology IMBA-G412ISA-R20, User Manual

Page: 76 / 164

621/20/2012164
P a g e 62
IMBA-G412IS A ATX Mo th e rb o a rd
Figure 4-20: Parallel Device Connector
S te p 3: Secure the connector . Secure the DB-25 connector to the external interface by
tightening the two retention screws on either side of the connector.
4.6.5 S e ria l De vic e Co n n e c tio n
The IMBA-G412ISA has one male DB-9 connectors on the external peripheral interface
panel for a serial device. Follow the steps below to connect a serial device to the
IMBA-G412ISA.
S te p 1:
Locate the DB-9 connector . The location of the DB-9 connector is shown in
Chapter 3 .
S te p 2:
Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 4-21.