IEI Technology IMBA-C2160-R10 User Manual Download Page 101

Page: 101 / 173

IMBA-C2160 ATX Motherboard

Page 87

5.3.8 AMT Configuration

The

AMT Configuration

menu (

BIOS Menu 10

) allows the advanced power

management options to be configured.

Advanced

Intel AMT

[Enabled]

Un-Configure ME

[Disabled]

Enable/Disable Intel (R)
Active Management
Technology BIOS
Extension. Note: iAMT H/W
is always enabled.
This option just controls
the BIOS extension
execution.
If enabled, this requires
additional firmware in the
SPI device.
---------------------

ÆÅ

: Select Screen

↑

↓

: Select Item

Enter: Select
+/-: Change Opt.
F1: General

Help

F2: Previous

Values

F3: Optimized

Defaults

F4:

Save & Exit

ESC: Exit

BIOS Menu 10: AMT Configuration

Intel AMT [Enabled]

Use

Intel AMT

option to enable or disable the Intel® AMT function.

Disabled

Intel® AMT is disabled

Enabled D

EFAULT

Intel® AMT is enabled

Un-Configure ME [Disabled]

Use the

Un-Configure ME

option to perform ME unconfigure without password operation.

Disabled D

EFAULT

Not perform ME unconfigure

Enabled

To perform ME unconfigure

Summary of Contents for IMBA-C2160-R10














































































































































































Search results

Summary of Contents for IMBA-C2160-R10

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-C2160-R10, User Manual

Search results

Summary of Contents for IMBA-C2160-R10

Reviews:

Brands by name

Popular brands