IEI Technology IMB-Q670 User Manual Download Page 91

Page: 91 / 179

IMB-Q670 Micro-ATX Motherboard

Page 77

TPM Support [Disable]

Use the

TPM Support

option to configure support for the TPM.

Disable D

EFAULT

TPM support is disabled.

Enable

TPM support is enabled.

5.3.3 CPU Configuration

Use the

CPU Configuration

menu (

BIOS Menu 5

) to enter the

CPU Information

submenu or enable Intel Virtualization Technology.

Advanced

CPU Configuration

> CPU Information

Intel Virtualization Technology [Disabled]

Socket specific CPU
Information

----------------------

ÅÆ

: Select Screen

↑

↓

: Select Item

Enter

Select

+/-: Change Opt.
F1: General

Help

F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Exit
ESC: Exit

BIOS Menu 5: CPU Configuration

Intel® Virtualization Technology [Disabled]

Use the

Intel® Virtualization Technology

option to enable or disable virtualization on the

system. When combined with third party software, Intel Virtualization technology allows

several OSs to run on the same system at the same time.

Disabled D

EFAULT

Disables Intel Virtualization

Technology.

Enabled

Enables Intel Virtualization Technology.

Summary of Contents for IMB-Q670




















































































































































































Search results

Summary of Contents for IMB-Q670

Reviews:

Brands by name

Popular brands

IEI Technology IMB-Q670, User Manual

Search results

Summary of Contents for IMB-Q670

Reviews:

Brands by name

Popular brands