IEI Technology IMB-H810-i2-R11 User Manual Download Page 59

Page: 59 / 172

IMB-H810-i2 microATX Motherboard

Page 43

3.3 External Peripheral Interface Connector Panel

The figure below shows the external peripheral interface connector (EPIC) panel. The

EPIC panel consists of the following:

Figure 3-26: External Peripheral Interface Connector

3.3.1 Audio Connector

CN Label:

AUDIO_CV1

CN Type:

Audio jack

CN Location:

See

Figure 3-26

The audio jacks connect to external audio devices.



Line In port (Light Blue):

Connects a CD-ROM, DVD player, or other audio

devices.



Line Out port (Lime):

Connects to a headphone or a speaker. With

multi-channel configurations, this port can also connect to front speakers.



Microphone (Pink):

Connects a microphone.

Summary of Contents for IMB-H810-i2-R11













































































































































































Search results

Summary of Contents for IMB-H810-i2-R11

Reviews:

Brands by name

Popular brands

IEI Technology IMB-H810-i2-R11, User Manual

Search results

Summary of Contents for IMB-H810-i2-R11

Reviews:

Brands by name

Popular brands