IEI Technology IMB-H810-i2-R11, User Manual

Page: 118 / 172

IMB-H810-i2 microATX Motherboard
Page 102
5.4.1 PCH-IO Configuration
Use the PCH-IO Configuration menu ( BIOS Menu 19 ) to configure the PCH chipset.
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Chipset
Auto Power Button Status [Disabled (ATX)]
Restore AC Power Loss [Last State]
> PCI Express Configuration
> PCH Azalia Configuration
Power Saving Function(ERP) [Disabled]
PCIEX16 Power
[1 x16 PCIE]
USB SW1 Power [+5V DUAL]
USB SW2 Power [+5V DUAL]
Select AC power state
when power is re-applied
after a power failure.
---------------------

: Select Screen
 
: Select Item
Enter Select
+ - Change Opt.
F1 General
Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 19: PCH-IO Configuration

Restore on AC Power Loss [Last State]
Use the Restore on AC Power Loss BIOS option to specify what state the system
returns to if there is a sudden loss of power to the system.

Power Off The system remains turned off

Power On The system turns on

Last State D
EFAULT
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.

Power Saving Function [Disabled]
Use the Power Saving Function BIOS option to enable or reduce power consumption in
the S5 state. When enabled, the system can only be powered-up using the power button.

Disabled D
EFAULT
Power Saving Function support disabled