IEI Technology IMB-H612 User Manual Download

Page: 74 / 199

IMB-H612 Mic ro -ATX Mo th e rb o a rd

P a g e 59



Line In port (Light Blue):

Connects a CD-ROM, DVD player, or other audio

devices.



Line Out port (Lime):

Connects to a headphone or a speaker.



Microphone (Pink):

Connects a microphone.

Figure 4-14: Audio Connector

S te p 3:

Check audio clarity

. Check that the sound is coming through the right speakers

by adjusting the balance front to rear and left to right.

4.6.2

LAN Co n n e c tio n

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection

to an external network. To connect a LAN cable with an RJ-45 connector, please follow

the instructions below.

S te p 1:

Locate the RJ-45 connectors

. The locations of the USB connectors are shown

Chapter 3

S te p 2:

Align the connectors.

Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the IMB-H612. See

Figure 4-15

Summary of Contents for IMB-H612








































































































































































































Search results

Summary of Contents for IMB-H612

Reviews:

Related manuals for IMB-H612

Brands by name

Popular brands

IEI Technology IMB-H612, User Manual

Search results

Summary of Contents for IMB-H612

Reviews:

Related manuals for IMB-H612

Brands by name

Popular brands