IEI Technology IMB-9454G-R20, User Manual

Page: 89 / 172

IMB-9454G Motherboard
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
Clear CMOS DESCRIPTION
Short 1-2 Normal Operation (Default)
Short 2-3 Clear CMOS Setup
Table 4-3: Clear CMOS Jumper Settings
The clear CMOS jumper is located in Figure 4-11 .
4.6.2 COM2 Mode Selection
Jumper Label: JP4
Jumper Type: 3-pin header
Jumper Settings: See Table 4-4
Jumper Location: See Figure 4-11
This jumper configures the COM2 connector as an RS-232 serial port or an
RS-422/RS-485 serial port. The selection options are shown in Table 4-4 .
JP4 DESCRIPTION
Short 1-2 RS-232 (Default)
Short 2-3 RS-422/RS-485
Table 4-4: JP4 Jumper Settings
4.7 Chassis Installation
After the CPU, the cooling kit, and the DIMM modules have been installed and after the
internal peripheral connectors have been connected to the peripheral devices and the
jumpers have been configure, the motherboard can be mounted into chassis.
Page 89