IEI Technology IDS-310-AL, User Manual

Page: 36 / 114

IDS-310-AL Embedded System
Page 22
3.7 Mounting the System
To mount the IDS-310-AL onto a VESA 75/100 surface using the mounting bracket,
please follow the steps below.
Step 1:
Attach the mounting bracket to a VESA 75/100 mounting surface with four
screws. Make sure it is attached securely. See Figure 3–15 .
Figure 3–15: Attach Mounting Bracket
Step 2:
Screw the included mounting screws (M4*6) to the mounting holes on the
bottom of the IDS-310-AL ( Figure 3–16 ).
Step 3: Hook the IDS-310-AL into the mounting holes on the mounting bracket
( Figure 3–16 ).
NOTE:
In the diagram below the bracket is already installed on a VESA 75/100 surface.