IEI Technology IAS0-W10B-N6210, User Manual

Page: 30 / 55

IASO-W10B-N6210 Medical Panel PC
Page 22
3.8 Powering On the System
WARNING / AVERTISSEMENT
To avoid risk of electric shock, this equipment must only be connected
to supply mains with protective earth.
Pour éviter tout risque d'électrocution, cet équipement ne doit être
connecté qu'au secteur avec mise à la terre de protection.
To power on the system, follow the steps below:
Step 1: Connect the power cord to the power adapter. Connect the other end of the
power cord to a power source. Connect the power adapter to the power
connector of the IASO-W10B-N6210. NOTE: The FSP FSP065-DHBM1 power
adapter came with the IASO-W10B-N6210 is a forming part of the medical
device.
Figure 3-4: Power Input Connector and Power Button
Step 2: Locate the power button on the bottom panel (Figure 3-4).
Step 3: Long press the power button to turn on the IASO-W10B-N6210. Step 0: