IEI Technology IAS0-W10B-N6210, User Manual

Page: 28 / 55

IASO-W10B-N6210 Medical Panel PC
Page 20
3.5 RS-232 Serial Port Connection
The bottom panel of the IASO-W10B-N6210 has one DB-9 male connector for RS-232
connection. The pinouts of the DB-9 connector are listed below.
Pin RS-232
1 DCD
2 RX
3 TX
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
Table 3-3: RS-232 Serial Port Pinouts
3.6 AT/ATX Mode Selection
AT or ATX power mode can be used on the IASO-W10B-N6210. The selection is made
through an AT/ATX switch located on the bottom panel ( Figure 3-2 ).
Figure 3-2: AT/ATX Switch Location