IEI Technology HYPER-RK39, User Manual, Page: 48 / 75

HYPER-RK39 SBC
Page 38
4.3 Full-size PCIe Mini Card Installation
The PCIe Mini card slot allows installation of either a full-size PCIe Mini card. To install a
full-size PCIe Mini card, please follow the steps below.
Step 1: Locate the PCIe Mini card slot . See Chapter 3 .
Step 2: Remove the retention screw . Remove the retention screw as shown in
Figure 4-1 .
Figure 4-1: Removing the Retention Screw
Step 3: Insert into the socket at an angle . Line up the notch on the card with the notch
on the slot. Slide the PCIe Mini card into the socket at an angle of about 20º
( Figure 4-2 ).