IEI Technology HYPER-KBN, User Manual

Page: 91 / 139

HYPER-KBN
P a g e 79
o
Ubuntu 8.10 (Intrepid)
o
Ubuntu 7.10 (Gutsy)
o
Ubuntu 6.10 (Edgy)
o
Debian 5.0 (Lenny)
o
Debian 4.0 (Etch)
o
SuSe 11.2
o
SuSe 10.3
NOTE:
Installing unsupported OS versions may cause the recovery tool to fail.
B.2 S e tu p P ro c e d u re fo r Win d o ws
Prior to using the recovery tool to backup or restore, a few setup procedures are required.
S te p 1:
Hardware and BIOS setup (see Section B.2.1 )
S te p 2:
Create partitions (see Section B.2.2 )
S te p 3: Install operating system, drivers and system applications (see Section B.2.3 )
S te p 4:
Build the recovery partition (see Section B.2.4 ) or build the auto recovery
partition (see Section B.3 )
S te p 5:
Create factory default image (see Section B.2.5 )
Step 0 :
The detailed descriptions are described in the following sections.
NOTE:
The setup procedures described below are for Microsoft Windows
operating system users. For Linux, most of the setup procedures are
the same except for several steps described in Section B.3 .