IEI Technology HTB-200-C236, User Manual

Page: 98 / 113

HTB-200-C236 Embedded System
Page 86
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the HTB-200-C236.
B.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
B.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.

Follow the electrostatic precautions outlined below whenever the device is
opened.

Make sure the power is turned off and the power cord is disconnected
whenever the HTB-200-C236 is being installed, moved or modified.

To prevent the risk of electric shock, make sure power cord is
unplugged from wall socket.
To fully disengage the power to the unit,
please disconnect the power cord from the AC outlet. Refer servicing to
qualified service personnel. The AC outlet shall be readily available and
accessible.

Users must not allow SIP/SOPs and the patient to come into contact at
the same time.

Grounding reliability can only be achieved when the equipment is
connected to an equivalent receptacle marked “Hospital Only” or “Hospital
Grade”.

Do not apply voltage levels that exceed the specified voltage range .
Doing so may cause fire and/or an electrical shock. Use a power cord that
matches the voltage of the power outlet, which has been approved and
complies with the safety standard of your particular country.