IEI Technology HTB-200-C236, User Manual

Page: 85 / 113

HTB-200-C236 Embedded System
Page 73
5.3 Component Replacement Procedure
WARNING!
Users are not advised to attempt to repair or replace any internal or
external components of the HTB-200-C236 embedded system other
than those listed below. If any other components fail or need
replacement, contact the IEI reseller or vendor you purchased the
HTB-200-C236 from or contact an IEI sales representative directly. To
contact an IEI sales representative, please send an email
to
sales@ieiworld.com .
5.3.1 SO-DIMM Replacement
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the HTB-200-C236. Please make sure the purchased SO-DIMM
complies with the memory specifications of the HTB-200-C236.
For dual channel configuration, always install two identical memory
modules that feature the same capacity, timings, voltage, number of
ranks and the same brand.
To replace a SO-DIMM memory module into a SO-DIMM socket, please follow the steps
below.
Step 1: Follow the instruction described in Section 0 to remove the top cover.
Step 2: Locate the SO-DIMM on the motherboard.