IEI Technology HTB-200-C236, User Manual

Page: 70 / 113

HTB-200-C236 Embedded System
Page 58
4.4.1.3 PEG Port Configuration
Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc.
Chipset
PEG Port Configuration
PEG Link Width Configuration [1 x16]
PEG 0:1:0 Not Present
Enable Root Port [Enabled]
Max Link Speed [Auto]
> PEG Port Feature Configuration
Select PEG Port Link
Width as x16 or 2x8 or 1x8
& 2x4 configuration.
----------------------

: Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
BIOS Menu 20: PEG Port Configuration

PEG Link Width Configuration [1x16]
Use the PEG Link Width Configuration option to configure the PCIe x16 channel mode
on the backplane.

1x16 D
EFAULT
Sets the PCIe x16 link width as one PCIe x16 slot

2x8 Sets the PCIe x16 link width as two PCIe x8 slots

Enable Root Port [Enabled]
Use the Enable Root Port option to enable or disable the PCI Express (PEG) controller.

Disabled
Disables the PCI Express (PEG) controller.

Enabled D
EFAULT
Enables the PCI Express (PEG) controller.