IEI Technology HTB-200-C236, User Manual

Page: 34 / 113

HTB-200-C236 Embedded System
Page 22
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
31 SATA_TX- 32 SMB_DATA
33 34 GND
35 GND 36 USB_DATA-
37 GND 38 U
39 +3.3V 40 GND
41 +3.3V 42 N/C
43 +3.3V 44 N/C
45 CLINK_CLK 46 N/C
47 CLINK_DATA 48 1.5V
49 CLINK_RST# 50 GND
51 MSATA_DET 52 +3.3V
Table 3-1: PCIe Mini Card Slot – Full Size (MSATA1) Pinouts
3.6 Expansion Card Installation
The HTB-200-C236 supports one PCIe 3.0 x16 slot and one PCIe 3.0 x4 slot. To install an
expansion card, follow the steps below.
Step 1: Remove the top cover. See Section 0 above.
Step 2: Locate an empty PCIe slot.
Step 3: Remove the blank bracket panel on the rear panel of the HTB-200-C236 that
aligns with the empty PCIe slot. Save this bracket screw (Figure 3-14).
Step 4: [PCIe x16 card only] Remove the card holder by removing the card holder
retention screw (Figure 3-14).