IEI Technology HSC-13Mx User Manual Download Page 22

Page: 22 / 72

Page 14

HSC-13Mx Industrial Camera

3.1 Installation Precautions

During installation, be aware of the precautions below:



Read the user manual

: The user manual provides a complete description of

the HSC-13Mx, installation instructions and configuration options.



DANGER! Disconnect Power

: Power to the HSC-13Mx must be

disconnected during the installation process. Failing to disconnect the power

may cause severe injury to the body and/or damage to the system.



Qualified Personnel

: The HSC-13Mx must be installed and operated only by

trained and qualified personnel. Maintenance, upgrades, or repairs may only

be carried out by qualified personnel who are familiar with the associated

dangers.

3.2 Installing a C-Mount Camera Lens

To install a C-mount camera lens to the HSC-13Mx, please follow the steps below:

Step 1:

Attach the supplied CS to C mount adapter to the lens mount of the HSC-13Mx.

Then, spin the adapter clockwise until it is secure to the HSC-13Mx.

Step 2:

Attach the C-mount camera lens to the CS to C mount adapter. Then, spin the

lens clockwise until it is secure to the adapter.

Step 0:

Figure 3-1: Installing a C-mount Camera Lens

Summary of Contents for HSC-13Mx









































































Search results

Summary of Contents for HSC-13Mx

Reviews:

IEI Technology HSC-13Mx, User Manual, Page: 22 / 72

Search results

Summary of Contents for HSC-13Mx

Reviews: