IEI Technology GRAND-C422-20D-H, User Manual

Page: 32 / 51

GRAND-C422-20D-H
Page 24
3.5 Power-On Procedure
3.5.1 Installation Checklist
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
To power on the GRAND-C422-20D-H, please make sure of the following:

The HDD/SSD is installed

The LAN cable is connected

The power cables are plugged in

The system is securely mounted
3.5.2 Power-on Procedure
To power-on the GRAND-C422-20D-H please follow the steps below:
Step 1: Connect the power source to the power input jacks.
Figure 3-9: Power Connection