IEI Technology F10B-BT User Manual Download

Page: 46 / 132

PPC-F08B/F10B-BT Panel PC

Page 32

3.11 Mounting the System

WARNING!

When mounting the PPC-F08B/F10B-BT panel PC, it is advisable to

have more than one person help with the installation to prevent

accidental damage to the panel and avoid personal injury.

The methods of mounting the PPC-F08B/F10B-BT are:



Wall mounting



Panel mounting



Rack mounting



Arm mounting



Stand mounting

The mounting methods are described in the following sections.

3.11.1 Wall Mounting

To mount the PPC-F08B/F10B-BT panel PC onto a wall, please follow the steps below.

Step 1:

Attach the wall mounting kit to the mounting surface with the included screws.

Make sure it is attached securely.

Figure 3-19: Attach Wall Mounting Kit to the Wall

Summary of Contents for F10B-BT





































































































































Search results

Summary of Contents for F10B-BT

Reviews:

Related manuals for F10B-BT

Brands by name

Popular brands

IEI Technology F10B-BT, User Manual

Search results

Summary of Contents for F10B-BT

Reviews:

Related manuals for F10B-BT

Brands by name

Popular brands