IEI Technology EP-265-GM45, User Manual

Page: 52 / 139

E-265-GM45/EP-267-GM45 Enrich POS System
Page 40
4.8.2 Preconfigured Jumpers
WARNING:
Do not change the settings on the jumpers in described here. Doing so
may disable or damage the system
The following jumpers are preconfigured for the EP-265-GM45/EP-267-GM45. Users
should
NOT
change these jumpers.
Jumper Name Label Type
LVDS voltage selection JP4 3-pin header
Table 4-2: Preconfigured Jumpers
4.8.3 Cash Drawer Voltage Select
Jumper Label: JP10
and
JP11
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-3
Jumper Location:
See
Figure 4-10
Two jumpers (JP10 and JP11) configure pin 4 on RJ-12 cash drawer connectors (CN9
and CN11). Pin 4 on the RJ-12 cash drawer connectors can be set as 12 V (default)
or +24 V. The Cash Drawer Voltage Select jumper selection options are shown in
Table
4-3
.
Short 1 – 2 (Default) Short 2 – 3
JP10 Cash drawer 1 (CN9) use +12 V Cash drawer 1 (CN9) use +24 V
JP11 Cash drawer 2 (CN11) use +12 V Cash drawer 2 (CN11) use +24 V
Table 4-3: Cash Drawer Voltage Select Jumper Settings