manualshive.com logo in svg

IEI Technology eNOVA-945GSE, User Manual

Share
Download
IEI Technology eNOVA-945GSE User Manual Download Page 38

 

 

eNOVA-945GSE Motherboard 

Page 22 

2.6.4 TPM Module 

A TPM connector on the eNOVA-945GSE is interfaced to the Southbridge through the 

LPC bus. The Southbridge supports TPM version 1.1 and TPM version 1.2 devices for 

enhanced security. TPM modules are available from IEI. Contact 

[email protected]

 for 

more information. 

2.7 Environmental and Power Specifications 

2.7.1 System Monitoring 

Two thermal inputs on the eNOVA-945GSE Super I/O Enhanced Hardware Monitor 

monitors the following temperatures: 

ƒ

 CPU 

temperature 

ƒ

 System 

temperature 

The eNOVA-945GSE Super I/O Enhanced Hardware Monitor also monitors the following 

fan speeds:   

ƒ

 

CPU Fan speed 

Voltage inputs on the eNOVA-945GSE Super I/O Enhanced Hardware Monitor monitors 

the following voltages: 

ƒ

 CPU 

Core 

ƒ

 +1.05 

V 

ƒ

 +3.30 

V 

ƒ

 +5.00 

V 

ƒ

 +12 

V 

ƒ

 +1.5 

V 

ƒ

 +1.8 

V 

ƒ

 +5 

VSB 

ƒ

 VBAT 

The values for the above environmental parameters are all recorded in the BIOS 

Hardware Health Configuration menu. 

Summary of Contents for eNOVA-945GSE




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands