IEI Technology eKINO-BT, User Manual

Page: 106 / 157

eKINO-BT Mini-ITX SBC
Page 92
IO=2E8h;
IRQ=10, 11
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ10, 11
IO=2D0h;
IRQ=10, 11
Serial Port I/O port address is 2D0h and the interrupt
address is IRQ10, 11
IO=2E0h;
IRQ=10, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10, 11
5.3.2.1.6 IrDA Configuration
Use the IrDA Configuration menu ( BIOS Menu 6 ) to configure the infrared port.
Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.
Advanced
IrDA Configuration
Serial Port [Enabled]
Device Settings IO=2E0h; IRQ=11;
Change Settings
[Auto]
Duplex Function
[Full Duplex]
Enable or Disable Serial
Port (COM)
---------------------
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
BIOS Menu 6: IrDA Configuration Menu
Serial Port [Enabled]
Use the Serial Port option to enable or disable the IrDA function.
Disabled Disable the IrDA function
Enabled D
EFAULT
Enable the IrDA function
Change Settings [Auto]
Use the Change Settings option to change the serial port IO address and interrupt
address.