IEI Technology ECN-780-Q67, User Manual

Page: 41 / 184

ECN-780-Q67 Em b e d d e d S ys te m
P a g e 28
S te p 3:
Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
ECN-780-Q67. See Figure 3-17 .
Figure 3-17: VGA Connector
S te p 4: Secure the connector . Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
3.9 In te l
®
AMT S e tu p P ro c e d u re
The ECN-780-Q67 is featured with the Intel® Active Management Technology (AMT). To
enable the Intel® AMT function, follow the steps below.
S te p 1:
Make sure the memory socket is installed with one DDR3 DIMM.
S te p 2: Connect an Ethernet cable to one of the RJ-45 connector LANs which supports
AMT.
S te p 3:
The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,