IEI Technology ECN-680A-H61, User Manual

Page: 46 / 190

ECN-680A-H61 Em b e d d e d S ys te m
P a g e 32
3.11.2 DVI Dis p la y De vic e Co n n e c tio n
The ECN-680A-H61 has one female DVI-I connector and one female DVI-D connector on
the rear panel. The DVI connectors are connected to digital display devices. To connect a
digital display device to the ECN-680A-H61, please follow the instructions below.
S te p 1:
Locate the DVI connector . The location of the DVI connector is shown in
Chapter 1 .
S te p 2:
Align the DVI connector . Align the male DVI connector on the digital display
device cable with the female DVI connector on the external peripheral interface.
S te p 3: Insert the DVI connector . Once the connectors are properly aligned with the
male connector, insert the male connector from the digital display device into the
female connector on the ECN-680A-H61. See
359H
Figure 3-23.
Figure 3-23: DVI Connector
S te p 4:
Secure the connector. Secure the DVI connector from the digital display device
to the external interface by tightening the two retention screws on either side of
the connector.