IEI Technology ECN-360A-HM65, User Manual

Page: 130 / 154

ECN-360A-HM65 Em b e d d e d S ys te m
P a g e 117
DISKPART> sel disk 0
DISKPART> create part pri size= ___
DISKPART> assign letter=N
DISKPART> exit
system32> format N: /fs:ntfs /q /v:Recovery /y
system32> exit
S te p 4: Build the recovery partition . Press any key to boot from the recovery CD. It will
take a while to launch the recovery tool. Please be patient. When the recovery
tool setup menu appears, type < 3 > and press <Enter> ( Figure C-30 ). The
Symantec Ghost window appears and starts configuring the system to build a
recovery partition. After completing the system configuration, press any key to
reboot the system. Eject the recovery CD.
Figure C-30: Manual Recovery Environment for Linux
S te p 5:
Access the recovery tool main menu by modifying the “menu.lst” . To first
access the recovery tool main menu, the menu.lst must be modified. In Linux,
enter Administrator (root). When prompt appears, type:
cd /boot/grub
vi menu.lst