IEI Technology ECN-360A-HM65, User Manual

Page: 119 / 154

ECN-360A-HM65 Em b e d d e d S ys te m
P a g e 106
C.2.5 Cre a te Fa c to ry De fa u lt Im a g e
NOTE:
Before creating the factory default image, please configure the system
to a factory default environment, including driver and application
installations.
To create a factory default image, please follow the steps below.
S te p 1:
Turn on the system. When the following screen displays ( Figure C-10 ), press
the < F3 > key to access the recovery tool. The message will display for 10
seconds, please press F3 before the system boots into the operating system.
Figure C-10: Press F3 to Boot into Recovery Mode
S te p 2: The recovery tool menu appears. Type < 4 > and press < Enter >. ( Figure C-11 )
Figure C-11: Recovery Tool Menu
S te p 3:
The About Symantec Ghost window appears. Click OK button to continue.