IEI Technology ECK-3692, User Manual

Page: 56 / 170

ECK-3692G Embedded System
Page 40
Step 4:
Insert four retention screws from the bottom of the bracket to secure the HDD
with the bracket (
Figure 4-4
).
Figure 4-4: HDD Retention Screws
Step 5:
Connect the IDE/SATA cable from the rear of the HDD to the IDE/SATA
connector on the motherboard (
Figure 4-5
).
Step 6:
Replace the DVD/HDD bracket into the ECK-3692G and reinsert the four
previously removed retention screws.
Figure 4-5: HDD Installation
Step 7:
Replace the top cover.
Step 0: