IEI Technology ECK-161B, User Manual

Page: 36 / 135

ECK-161B Embedded System
Page 22
4.2.4 Bottom Panel Removal
Before installing the internal components, the bottom panel must be removed. To remove
the bottom panel, please follow the steps below:
Step 1:
Turn the ECK-161B embedded system over.
Step 2:
Locate the bottom panel retention screws, four on the bottom panel (
Figure 4-3
),
two on the right panel and two on the left side panel (
Figure 4-4
).
Figure 4-3: Bottom Panel Retention Screws (Bottom)
Figure 4-4: Bottom Panel Retention Screws (Side)
Step 3:
Remove the eight bottom panel retention screws.
Step 4:
Gently remove the bottom panel from the ECK-161B.
Step 0: