IEI Technology DRPC-242-ADL-P Series Page 18 User Manual Download

Page: 18 / 167

DRPC-242-ADL-P

Page 2

1.1

Overview

Figure 1-1: DRPC-242-ADL-P Series

The DRPC-242-ADL-P Series is an embedded system with Intel® Alder Lake P processor

and two DDR4 SO-DIMM memory (8GB pre-installed). It is designed for harsh

environment applications, and supports DIN rail mounting method.

The DRPC-242-ADL-P Series accepts a wide range of DC power input (12V ~ 28V),

allowing it to be powered anywhere. It is equipped with two USB 3.2 Gen2 (10Gb/s), four

USB 2.0, three 2.5GbE, two isolation RS-232 ports, two isolation RS-422/485 ports, one

HDMI and one Disp+ to provide rich I/O options for various applications. Two

RS-232 and two USB 2.0 are reserved inside for expansion

Furthermore, the DRPC-242-ADL-P also has a PCIe x4 slot that can support half-size

expansion cards

1.2

Features

The DRPC-242-ADL-P Series features are listed below:

Summary of Contents for DRPC-242-ADL-P Series








































































































































































Search results

Summary of Contents for DRPC-242-ADL-P Series

Reviews:

Related manuals for DRPC-242-ADL-P Series

Brands by name

Popular brands

IEI Technology DRPC-242-ADL-P Series, User Manual

Search results

Summary of Contents for DRPC-242-ADL-P Series

Reviews:

Related manuals for DRPC-242-ADL-P Series

Brands by name

Popular brands