IEI Technology DM-F65A/R, User Manual

Page: 68 / 130

DM-F Series Monitor
Page 52
To mount the DM-F series LCD monitor onto a stand, please follow the steps below.
Step 1: Line up the threaded holes on the monitor rear panel with the screw holes on the
monitor stand mounting plate.
Step 2: Secure the monitor to the stand with the supplied retention screws (Figure 3-44).
Figure 3-44: Monitor Stand Mounting
3.3.6 Arm Installation
The DM-F series LCD monitor has VESA standard mounting holes tapped into the rear
panel. The standard holes are M4 set at 75 mm x 75 mm or 100 mm x 100 mm apart
(Figure 3-42 and Figure 3-43). To mount the DM-F series LCD monitor onto a monitor
arm, please follow the steps below.
Step 1: Line up the threaded holes on the monitor rear panel with the screw holes on the
monitor arm mounting plate.
Step 2: Secure the monitor to the arm with the supplied retention screws (Figure 3-45).
Step 0: