IEI Technology DM-F65A/R, User Manual

Page: 63 / 130

DM-F Series Monitor
Page 47
3.3.3 Cabinet and Rack Installation (for F19A)
NOTE:
When purchasing a cabinet/rack installation bracket, make sure it is
compatible with both the monitor and the cabinet/rack into which the
monitor is installed.
To install the DM-F19A to a cabinet or rack, please follow the steps below:
Step 1: Slide the rear of the DM-F series LCD monitor through the rack/cabinet bracket
until the aluminum frame is flush against the front of the bracket ( Figure 3-36 ).
Figure 3-36: Slide DM-F19A into the Rack/Cabinet Bracket
Step 2: Secure the rack/cabinet bracket to the monitor. To do this, secure the 10
mounting brackets to the corresponding screw holes on the rear of the monitor
using the provided retention screws ( Figure 3-37 ).