IEI Technology Afolux LX Series, User Manual

Page: 41 / 131

AFOLUX LX Series Flat Panel PC
Page 27
3.3 Installation and Configuration Steps
The following installation steps must be followed.
Step 1:
Unpack the flat panel PC
Step 2:
Install CF card
Step 3:
Install HDD (AFL-12A-LX model only)
Step 4:
Mount the flat panel PC
Step 5:
Connect peripheral devices to the bottom panel of the flat panel PC
Step 6:
Configure the system
Step 0:
3.4 Unpacking
To unpack the flat panel PC, follow the steps below:
WARNING!
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the flat panel PC has been
properly installed. This ensures the screen is protected during the
installation process.
Step 1:
Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2:
Open the external (second) box.
Step 3:
Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4:
Lift the monitor out of the boxes.
Step 5:
Remove both polystyrene ends, one from each side.