IEI Technology AFOLUX AFL-315AW/B, User Manual

Page: 89 / 198

AFOLUX Kiosk Application Series
Page 73
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad
: When configuring the AFL-315, place it on an
antic-static pad. This reduces the possibility of ESD damaging the AFL-315.
Only handle the edges of the PCB
:-: When handling the PCB, hold the PCB
by the edges.
5.3 Turn off the Power
WARNING:
Failing to turn off the system before opening it can cause permanent
damage to the system and serious or fatal injury to the user.
Before any maintenance procedures are carried out on the system, make sure the system
is turned off.
5.4 Opening the System
5.4.1 Removing the Back Panel
To access the AFL-315 internally the back panel must be removed. To remove the back
panel, please follow the steps below.
Step 1: Follow all anti-static procedures
. See
Section 5.2
.
Step 2: Turn off the power
. See
Section 5.3
.
Step 3: Remove the retention screws on the back
. Remove the five retention screws
(
Figure 4-1
) from the rear panel.