IEI Technology AFL4-W10-EHL, User Manual

Page: 36 / 135

AFL4-W10/W12/12/W13-EHL Panel PC
Page 35
If the AFL4-W10/W12/12/W13-EHL fails to boot due to improper BIOS settings, the clear
CMOS jumper clears the CMOS data and resets the system BIOS information. To do this,
push the clear CMOS button for three seconds, then restart the system. The clear CMOS
button location is shown in Figure 3-5 .
Figure 3-5: Clear CMOS Button Location
3.7 AT/ATX Mode Selection
AT or ATX power mode can be used on the AFL4-W10/W12/12/W13-EHL. The selection
is made through an AT/ATX switch located on the bottom panel ( Figure 3-6 ).
Figure 3-6: AT/ATX Switch Location
3.7.1 AT Power Mode
With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The AFL4-W10/W12/12/W13-EHL panel PC turns on automatically when
the power is connected. The AT mode benefits a production line to control multiple panel
PCs from a central management center and other applications including:
▪
ATM