IEI Technology AFL3-W22C-ULT3, User Manual

Page: 80 / 151

AFL3-W15C/W19C/W22C-ULT3 Panel PC
Page 64

Device Mode [RS232]
Use the Device Mode option to select the Serial Port 3 signaling mode.

RS422
Serial Port 3 signaling mode is RS-422

RS232 D
EFAULT
Serial Port 3 signaling mode is RS-232

RS485
Serial Port 3 signaling mode is RS-485
4.3.2.1.2 Serial Port 2 Configuration

Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled Disable the serial port

Enabled D
EFAULT
Enable the serial port

Change Settings [Auto]
Use the
Change Settings
option to change the serial port IO port address and interrupt
address.

Auto D
EFAULT
The serial port IO port address and interrupt
address are automatically detected.

IO=2F8h; IRQ=3 Serial Port I/O port address is 2F8h and the
interrupt address is IRQ3

IO=3F8h; IRQ=3,
4,5,6,7,9,10,11,12 Serial Port I/O port address is 3F8h and the
interrupt address is IRQ3,4,5,6,7,9,10,11,12

IO=2F8h; IRQ=3,
4,5,6,7,9,10,11,12 Serial Port I/O port address is 2F8h and the
interrupt address is IRQ3,4,5,6,7,9,10,11,12

IO=3E8h; IRQ=3,
4,5,6,7,9,10,11,12 Serial Port I/O port address is 3E8h and the
interrupt address is IRQ3,4,5,6,7,9,10,11,12

IO=2E8h; IRQ=3,
4,5,6,7,9,10,11,12 Serial Port I/O port address is 2E8h and the
interrupt address is IRQ3,4,5,6,7,9,10,11,12