IEI Technology AFL3-W15C-ADLP User Manual Download Page 80

Page: 80 / 156

AFL3-W15C/W19C/W22C-ADLP

Page 64

4.3.3

Trusted Computing

Use the

Trusted Computing

menu (

BIOS Menu 8)

to configure settings related to the

Trusted Computing Group (TCG) Trusted Platform Module (TPM).

BIOS Menu 8: Trusted Computing



Security Device Support [Enable]

Use the

Security Device Support

option to configure support for the TCG EFI Protocol

and INT1A.



Disable

Security Device support is disabled.



Enable

EFAULT

Security Device support is enabled.



Pending Operation [None]

Use the

Pending Operation

option to schedule an operation for the security device.



None

EFAULT

TPM information is previous.



TPM Clear

TPM information is cleared

Summary of Contents for AFL3-W15C-ADLP





























































































































































Search results

Summary of Contents for AFL3-W15C-ADLP

Reviews:

Related manuals for AFL3-W15C-ADLP

Brands by name

Popular brands

IEI Technology AFL3-W15C-ADLP, User Manual

Search results

Summary of Contents for AFL3-W15C-ADLP

Reviews:

Related manuals for AFL3-W15C-ADLP

Brands by name

Popular brands