IEI Technology AFL3-W15C-ADLP User Manual Download Page 76

Page: 76 / 156

AFL3-W15C/W19C/W22C-ADLP

Page 60



Intel® SpeedStep™ [Enabled]

Use the

Intel® Sp

eedStep™

to reduce cpu operating frequency to achieve reduced power

consumption technology. Allows more than two frequency ranges to be supported.



Disabled

Disables

the Intel® SpeedStep™.



Enabled

EFAULT

Enables

the Intel® SpeedStep™.



C states [Disabled]

Use the

C states

option to enable or disable the CPU Power Management.



Disabled

EFAULT

Disables

CPU to go to C states when it’s not

100% utilized.



Enabled

Enables CPU to go to C states when it’s not

100% utilized.



Turbo Mode [Enabled]

Use the

Turbo Mode

option to enable or disable Turbo Mode which requires Intel Speed

Step or Intel Speed Shift to be available and enabled.



Disabled

Disables Turbo Mode Technology



Enabled

EFAULT

Enables Turbo Mode Technology



Intel (VMX) Virtualization Technology [Enabled]

Use the

Intel (VMX) Virtualization Technology

option to enable or disable virtualization

on the system. When combined with third party software, Intel® Virtualization technology

allows several OSs to run on the same system at the same time.



Disabled

Disables Intel Virtualization Technology.



Enabled

EFAULT

Enables Intel Virtualization Technology.

Summary of Contents for AFL3-W15C-ADLP





























































































































































Search results

Summary of Contents for AFL3-W15C-ADLP

Reviews:

Related manuals for AFL3-W15C-ADLP

Brands by name

Popular brands

IEI Technology AFL3-W15C-ADLP, User Manual

Search results

Summary of Contents for AFL3-W15C-ADLP

Reviews:

Related manuals for AFL3-W15C-ADLP

Brands by name

Popular brands