IEI Technology AFL3-W15C-ADLP, User Manual

Page: 48 / 156

AFL3-W15C/W19C/W22C-ADLP
Page 32
3.8.2 ATX Power Mode
With the ATX mode selected, the AFL3-W15C/W19C/W22C-ADLP panel PC goes in a
standby mode when it is turned off. The panel PC can be easily turned on via network or a
power switch in standby mode. Remote power control is perfect for advertising
applications since the broadcasting time for each panel PC can be set individually and
controlled remotely. Other possible application includes
 Security surveillance
 Point-of-Sale (POS)
 Advertising terminal
3.9 Mounting the System
The methods of mounting the AFL3-W15C/W19C/W22C-ADLP are listed below.
 Wall mounting
 Panel mounting
 Rack mounting
 Arm mounting
 Stand mounting
The mounting methods are described below.
3.9.1 Wall Mounting
To mount the flat bezel panel PC onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.